DIY-friendly Pre-wired Kit
A small, self-contained off-grid kit with a ground mount frame included. Six Jinko panels, a Sigenergy battery, and a pre-wired inverter unit. Flat-packed and ready to install.
It’s DIY-friendly. The inverter, battery, and AC switchboard arrive pre-assembled on a pallet. You can install the frame, pour the footings, and mount the panels yourself. A licensed electrician is still required for the final connections. Earth stake installation, cable terminations and system commissioning should be completed by your local certified licensed electrician
That’s it. No complex wiring on your end.
DIY & Pre-wired Kit Notes
- Ground Mount Requires 4 concrete footings (600×600×600mm min, 3.0m centre spacing, 1667mm front-to-rear at 20° tilt).
- Frame, footings, and panel mounting are owner-install friendly.
- Licensed electrician required for earth stake, cable connections, and commissioning.
- System qualifies technically for rebates, but limited benefit at this size.





